Curve Inpool Step System
- Start with the base step unit (staircase) and then expand into a complete Curve system at any time
- Curve system has the sweeping “wedding cake” look that many homeowners want in a pool step
- Four tread unit is for above ground pools
- Above ground unit can be assembled with treads curving inwards or outwards depending on customer preferences
- Eye-catching, graceful sloping handrails
- Two tone color – grey treads with warm grey (beige) sidewalls and handrails. Complements any swimming pool!
- Adjustable base pads to compensate for a slightly-dished pool floor
- Weighed down by adding 20lbs of sand to the sidewalls
- Weight limit – 400 lbs.
- Tread width – 27”
- Tread depth – 10”
- Riser height – 11”
- Unit depth – 32”
- Handrail height (from top step) – 30”
- Height to top tread – In ground 36” – Above ground 47”
- Mounting bracket length – 24”
- Overall outside width – 38”
- Complete Curve System width – 58”
- 5 year full factory warranty on manufacturing defects and workmanship
Step-1x Inpool Steps
- For above ground pools with flat bottoms.
- Easy, snap together installation
- Can be shipped via UPS/RPS
- Large, flat steps (each with 270 square inches) complete with two all-plastic handrails
- Mounting brackets included; secures unit to pool or deck
- Gray steps for high visibility in water
- Economical, yet strong; holds 400 pounds.
- Improved base system
- 5 year full factory warranty on manufacturing defects and workmanship
- Fits Decks up to 60″
- Height to Top Step – 47 inches
- Height to Handrail – 38 inches
- Projection into Pool – 32 inches
- Width – 31 inches
- Riser Height – 11 inches
- Step Dimensions – 10″ x 27″
PES Pool Entry System (Limited Availability)
- The unique design of the pool entry system allow two units to be joined together to form a complete entry/exit system into the pool. Designed for all people including elderly swimmers and physically challenged swimmers:
- Five steps, instead of four.
- Top step covers the pool top rail.
- Meets current and proposed ANSI/NSPI Standards.
- Easy assembly; steps and risers snap into side panels and are held in place with plastic wedges. No metal parts.
- Non-slip step surfaces are grey for high visibility.
- Adjusts to fit 48″ to 54″ tall pools and decks.
- Excellent for elderly, slightly handicapped, or heavy swimmers. Holds over 400 pounds.
- Does not rest on or attach to pool.
- All plastic construction will not affect water chemistry and will not corrode.
- Gate restricts access to the pool. It is self-closing and self-latching.
- Includes deck connector for easy attachment to deck.
- Fits decks up to 54″ or can fit taller decks using special mounting instructions.
- 5 year full factory warranty on manufacturing defects and workmanship
- SPECIFICATIONS OF POOL ENTRY SYSTEM:
- Overall Projection into pool – 36″
- Overall height – 81″ (plus up to 6″ adjustability)
- Overall width – 31″
- Step – 10″ x 27″
- Top Platform – 12″ x 27″
- Handrail height (from top step) – 32″
- Riser height – 11″
- SPECIFICATIONS OF GATE:
- Height of Gate – 58″
- Width of Gate – 27″
- Height of Latch – 57″
- Gate Is Self-Closing & Self-Latching.
- Includes Padlock.
6000X Eliminator Heavy-Duty Inpool Deck Ladder
- Deluxe heavy-duty in-pool ladder
- Totally adjustable for deck heights from 46″ to 54″
- 5″ x 18″ wide
- Flat treads for easier climbing
- Includes deck platform
- Warm grey side rails with grey treads for high visibility in water.
- 10lbs of sand required for installation
- Features an anti-entrapment barrier
- Optional #6000X-EXT Extension Kit available to extend ladder to approximately 68 inches
- Weight guideline: 300 lbs.
- 5 year full factory warranty on manufacturing defects and workmanship
7000X Eliminator A-Frame Ladder
- Warm gray color to complement today’s brown or gray tone pool
- Eliminator A-Frame Ladder for 48” to 54” pools
- Ladder must be attached to pool frame -not for use on soft-sided/inflatable pools
- Superior Heavy-duty construction
- Padlock for outside treads swing up treads included for security
- No sand or bricks are required to prevent floating; fills with water
- Outer treads can be padlocked (cable lock included)
- Elongated treads measure 5” x 18” wide
- Extended 14″ Deck
- Meets 2018 ISPSC 702.2.1 barrier requirements
- Five-year warranty
- Weight limit: 300 lbs.
7100X Evolution A-Frame Ladder
- Warm gray color to complement today’s brown or gray tone pool
- Economical yet full-featured A-Frame Ladder
- Adjustable to fit 48” to 54” high pools
- The ladder must be attached to pool frame – not for use on soft-sided/inflatable pools
- Each side adjusts independently
- Snap-lock treads for quicker, easier assembly
- Five treads on each side
- Swing-up outer treads for safety
- Outer treads can be padlocked (padlock included)
- Full 16” inside tread width
- 12″ Deck
- Strong sturdy design
- Large top platform
- Minimal hardware
- No sand or bricks required; fills with water
- Meets 2018 ISPSC 702.2.1 barrier requirements
- Five-year warranty
- Weight limit: 300 lbs.
7200 Roll-Guard A-Frame Safety Ladder
- Aesthetically pleasing contemporary design in beautiful warm gray color
- Large 5-inch x 18-inch wide Comfortreads
- Curved side rails designed with strength in mind
- Inner side rails include integrated side barriers to prevent entry behind the ladder
- Easy assembly with minimal hardware
- Adjusts to fit pools 48” to 56” tall
- Lockable Roll-Guard Barrier (lock included)
- Extra-large top platform
- Just fill side rails with water to prevent floating, no sand or bricks needed
- Fits pool top seats up to 14 inches wide
- The ladder must be attached to the pool frame -not for use on soft-sided/inflatable pools.
- Convertible to in-pool ladder using CK7200 kit – sold separately
- 300lb Weight Limit
- 5 year full factory warranty on manufacturing defects and workmanship